Lithium Iron Phosphate K30 3.2V High Power 200Wh Outdoor Portable Self-driving Camping Mobile Power Supply with Energy Storage

Dear customers and friends,

      Hello! Welcome to our Suyijia store:

*The battery in this store supports proxy purchasing/wholesale/group purchase!

*If you need preferential prices, please pay attention to our store, and contact customer service to inform your needs, we will try our best to give you the biggest discount!

Lithium Iron Phosphate K30 3.2V High Power 200Wh Outdoor Portable Self-driving Camping Mobile Power Supply with Energy Storage  

Product parameters:

Model: K30 portable energy storage power bank

Built-in battery: 200Wh (55000mAh/3.2V). Lithium iron phosphate battery

Adapter: 15V/2A

Solar panel input: 18V-24V/60W recommended

Full charge time: 5-6 hours

USB interface: USB2.0

DC output: 12.8V/8A USB 5V/2.1A

Starting current: 200A (peak value 400A)

AC continuous output: 150W

AC maximum output: 300W

AC output voltage: 110V/220V

Working temperature: -10C-40C

Lifespan: >2000 times

Charging method: 18V-24V solar panel, AC adapter, car charger.

Size: 17.5cm*8.4cm*15.9cm

Weight: 2.61kg

packing list:

1pcs K30 Energy storage power supply *1

widely used:

Car electronic appliances / car air pump tools / mobile phones / cameras / drones / fans / laptops / small fans / camping / solar panels / power tools / etc.

LCD screen description:

For safer and longer cycle life, this product uses lithium iron phosphate battery, but the voltage drop of lithium iron phosphate is not more obvious than other lithium batteries, so please ignore the percentage displayed on the LCD screen.

Note: When using the product, the voltage display is unstable, please stop input and output to obtain a more accurate display.

Charging instructions: 
1. Please turn on the product before charging (the switch “ON/OFF” is turned on).

  2. To ensure 100% full charge, please wait until the green light of the charger is on.

Commercially available 12V models can start/auxiliary ignition, equipped with intelligent anti-reverse connection starter clip.

Instructions for starting the vehicle:

1. Please make sure that the red positive pole and black negative pole are connected before starting the vehicle, otherwise it will cause damage due to reverse connection.

2. Before use, please charge the product to a power level above 12.6V (55%) to start the vehicle;

3. The performance of lithium iron phosphate battery will decrease at low temperature (below 10°C), and the vehicle may not be able to start below 0°C.

               The correct operation process of automatic start of the car
Instructions:

1. Before starting the car, please make sure that at least 2 LED indicators of the main unit are on, then fully insert the blue plug into the main unit socket, and confirm that the cable indicator light is off.

2. Connect the red clip to the positive (+) battery terminal and the black clip to the negative (-) battery terminal.

3. Start the vehicle.

4. When the vehicle starts, please make sure to unplug the clamp wire from the power bank, and then unplug the clamp wire from the car battery terminal. Please do not connect the red and black clips to the vehicle battery terminals within 30 seconds.

Special instructions for smart jumper cables:

Follow the instructions on the cable lights:

1. Light on: Indicates that the wiring is correct, the circuit is normal, and the engine can be started.

 2. The light is off: it means that the positive and negative poles of the battery are connected incorrectly, and the main unit cannot be turned on and working. Please check and make sure that the wiring is correct.

 3. Light flashes quickly: Indicates a short circuit, the light goes out soon, please check and reconnect.

4. The light flashes slowly: it means that the battery is in an overcharge protection state, and the relay is disconnected to protect the product. Especially after the startup is successful, if you do not unplug the cable clip, the light will flash slowly. If you want to start again, please unplug the cable clip from the host and the car, and then reconnect correctly according to the first instruction.

5. After starting the car and pulling up the clip cable, please wait 30 seconds before trying to connect the black and red clips.

*Please read the product instruction manual carefully before using this product*

Precautions:

1. Do not get close to the fire source;

2. Do not use and store in high temperature and humid environment;

3. Please keep it out of the reach of children;

4. Do not disassemble the battery or change the structure of the battery by yourself, so as not to cause a fire.

5. When a new battery is used for the first time or used for a long time after storage, it must be fully charged before it can be used.

guard against:

1. Please allow slight color difference between the paper card and the picture shown.

2. Please allow small size deviation due to human measurement.

3. Due to the influence of light and monitor brightness, the color tone of the photo may be slightl